[2018 Testpassport New] Microsoft certification 70-741 practice questions

Testpassport Microsoft MCSA 70-741 practice questions cover all the exam topics of real Microsoft 70-741 test. Show all the exam topics below. 
Implement Domain Name System (DNS) (15-20%)
Implement DHCP and IPAM (25-30%)
Implement Network Connectivity and Remote Access Solutions (20-25%)
Implement Core and Distributed Network Solutions (15-20%) 
Implement an Advanced Network Infrastructure (15-20%)

If you are worry about 70-741 Networking with Windows Server 2016 exam, Testpassport can help you pass any IT exam. Testpassport is one of the most popular websites all over the world. It keeps excellent information on IT Certifications and provides the current data. It has not only thorough information on every certification but also provides you your required study material for your targeted certification. 70-741 Networking with Windows Server 2016 exam is regarded as one of the most favourite Microsoft Certifications.

Share some MCSA 70-741 exam questions and answers below.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 than runs Windows Server 2016.
Users report that their client computers fail to obtain an IP address.
You open the DHCP console as shown in the Exhibit. (Click the Exhibit button.)

Scope1 has an address range of 172.16.0.10 to 172.16.0.100 and a prefix length of 23 bits.
You need to ensure that all of the client computers on the network can obtain an IP address from Server2.
Solution: You run the Reconcile-DhcpServerv4IPRecord cmdlet.
Does this meet the goal?
A. Yes
B. No
Answer: B

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You start the DHCP Server service.
Does this meet the goal?
A. Yes
B. No
Answer: B

You have a virtual machine named VM1 that runs Windows Server 2016, VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1. vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface, Quality of Service? (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors.
Which Windows PowerShell command should you run on the host of VM1?
A. Set-NetAdapterRss
B. Set-NetAdapterRdma
C. Set-NetAdapterQos
D. Set-NetAdapterSriov
Answer: D

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?
A. From the properties of Scope1, modify the Conflict detection attempts setting.
B. From the properties of Scope1, configure Name Protection.
C. From the properties of IPv4, configure the bindings.
D. From IPv4, create a new filter.
E. From the properties of Scope1, create an exclusion range.
F. From IPv4 run the DHCP Policy Configuration Wizard.
G. From Control Panel, modify the properties of Ethernet.
H. From Scope1, create a reservation.
Answer: F

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You increase the scope size.
Does this meet the goal?
A. Yes
B. No
Answer: B

We can help you to achieve your goals. Testpassport is a website that can provide all information about different IT certification exam. Testpassport can provide you with the best and latest exam resources. To choose Testpassport you can feel at ease to prepare your Microsoft 70-741 exam. Testpassport has developed the newest Microsoft MCSA 70-741 training materials about the popular 70-741 Networking with Windows Server 2016 exam, including some pertinent simulation tests that will help you consolidate related knowledge and let you be well ready for Microsoft certification 70-741 exam.

Testpassport 70-741 Networking with Windows Server 2016 exam Training Tools are detailed and provide you with a real time environment. With the complete collection of questions and answers, Testpassport has assembled to take you through Q&As to your 70-741 Networking with Windows Server 2016 Exam preparation. You will cover every field and category helping to ready you for your successful 70-741 Networking with Windows Server 2016 Certification. Testpassport is your source for the Microsoft 70-741 exam.

Related exams:

70-740 Installation, Storage, and Compute with Windows Server 2016
70-742 Identity with Windows Server 2016

Leave a Reply

Your email address will not be published. Required fields are marked *